NewFinance is now available on our tattoo training, through our partner Ideal4Finance, so you can spread the cost with monthly payments.Finance is now available through our partner Ideal4FinanceFind out more hereFind out more

Learning the craft · needles

Tattoo needle sizes explained: which needles I use for fine line

If you've opened a box of tattoo cartridges and stared at a code like 1003RL, this is for you. Here's how to read it, what the sizes mean, and the needles I teach fine line on.

The short answer

A tattoo needle code tells you the diameter, the number of needle points and how they're arranged. 1003RL means three 0.30 mm needles in a round liner. For fine line you'll mostly use round liners in 0.25 mm or 0.30 mm. I teach fine line on groupings of 3, and I avoid single needles because of the risk of blowouts.

How do you read a tattoo needle code?

Read it in three parts, left to right. The first two digits are the diameter, the next two are the number of needle points, and the letters are the configuration.

Part of the codeIn 1003RLWhat it means
First two digits10Diameter: #10, which is 0.30 mm
Next two digits03Number of needle points: 3
LettersRLConfiguration: round liner

Some boxes shorten it to just the grouping and the letters, like 3RL. Then you'll find the diameter printed separately on the box, as a number like #10 or in millimetres.

Tattoo needle sizes: what 0.25 mm and 0.30 mm mean

The size number is the thickness of each needle. The smaller the number, the finer the needle.

Number (gauge)DiameterWhat it's often called
#060.20 mmExtra bugpin
#080.25 mmBugpin
#100.30 mmDouble zero, or standard on some boxes
#120.35 mmStandard, or large standard on some boxes
#140.40 mmLess common, for heavy ink flow

The number is sometimes called the gauge. The names vary by brand, so go by the number or the millimetres, not the name. Bugpins (#08 and finer) are the thinnest needles you'll usually see. For fine line, the sizes that come up most are #08 (0.25 mm) and #10 (0.30 mm).

What does the needle count mean?

The needle count is how many needle points are grouped together. The more points, the bigger the mark each pass makes on the skin.

A 03RL gives a much finer line than a 14RL, because it has fewer points bundled together. For fine line, you'll be working at the small end: a grouping of 3 or so.

Tattoo needle types: RL, RS, M1 and RM

Needle types, or configurations, are how the points are grouped. For fine line, you'll spend almost all your time on round liners.

LettersNameHow the needles sitIn fine line
RLRound linerGrouped tightly in a circleYour linework needle. This is the one for fine line
RSRound shaderIn a circle, spaced more looselySmall areas of soft shading
M1Magnum (weaved)Two offset rowsShading and packing colour on larger areas, so rarely needed in fine line
RMCurved or soft edge magnumA rounded rowSoft, smooth shading

Which needles do I use for fine line?

I teach fine line on a grouping of 3, so a 3RL.

You'll often read that a single needle (1RL) is the fine line needle. I actively avoid single needles, because of the risk of blowouts. A blowout is no more likely on fine line than on any other tattoo, but it's easier to see, because the line is the whole design.

Tattooing 101 makes a similar point: thinner lines go into the skin more easily, and that makes it easier to go too deep and cause a blowout.

What is needle taper, and does it matter for fine line?

Taper is how gradually each needle narrows to its point. Boxes usually say short, medium, long or extra long.

A short taper has a blunter point that reaches full thickness quickly. A longer taper narrows more slowly to a finer point. Guides for fine line work suggest a long or extra-long taper.

How does needle size link to needle depth?

Size and depth work together. Even the right needle will blow out if it goes too deep.

I have my needle hanging at 4 mm, and the top third of it goes into the skin. If you lose sight of half your needle, you're probably too deep. There's more on that, and on what a blowout looks like, in my guide to how deep a tattoo needle should go.

Cartridges or needles on a bar: what to check on the box

Traditional needles are soldered onto a long metal bar, and you'll mostly see them on coil machines. Cartridges house the needles in a plastic casing, and most rotary and pen machines use them.

Before you buy any cartridge, check the box says it's sterile and single use.

How you learn this on my course

You don't need to work any of this out alone before you start.

  • Before day oneYour pre-course portal covers bloodborne pathogens and machine and needle knowledge.
  • Day oneYou learn the ins and outs of your machine and needles, how to tattoo safely, and how we use fake skin to nail your line work.
  • Your kitYou leave with a full professional kit and machine to keep, the same standard I use in my own studio every week.

Learning fine line from scratch? My Beginners Training is four days in person near Bishop's Stortford, in a group of no more than three, with live models from day three. It's IBA accredited and insurable.

Already a PMU artist? You already understand skin and needles. My PMU course takes you onto live models, and my online course shows you how to practise on latex before you work on skin.

Quick answers

What are the different sizes of tattoo gun needles?
The common diameters are #06 (0.20 mm), #08 (0.25 mm), #10 (0.30 mm) and #12 (0.35 mm). The number of needle points and their arrangement are separate parts of the code.
What does 1003RL mean on a tattoo needle?
#10 diameter (0.30 mm), 3 needle points, round liner.
What is a bugpin needle?
A thinner needle than standard. #08 (0.25 mm) is a bugpin, and #06 (0.20 mm) is an extra bugpin.
What are M1 tattoo needles typically used for?
M1 is a weaved magnum, with needles in two offset rows. It's used for shading and packing colour on larger areas.
What needle is best for fine line tattoos?
Round liners in #08 or #10. I teach fine line on a 3RL and avoid single needles, because of the risk of blowouts.
How deep should my tattoo needle be?
I have my needle hanging at 4 mm, and the top third of it goes into the skin. If you lose sight of half your needle, you're probably too deep. My needle depth guide covers it in full.

Sources

  1. TattooBase, "Tattoo needle sizes and configurations explained: RL, RS, RM and M1". How to read a needle code, configurations and taper.
  2. Magnum Tattoo Supplies, "The complete buyer's guide to Magnum Gen 2 tattoo cartridges". Needle diameters, taper and cartridge safety features.
  3. Barber DTS, "Tattoo Needle Guide: Everything You Need to Know as an Artist". Size names (#10 double zero, #12 standard, #14 0.40 mm), needle count (03RL vs 14RL), needles on a bar vs cartridges.
  4. Tattooing 101, "Tattoo Needle Sizes + Types: Tattoo Needle Size Chart" (updated 15 May 2026). Needle count, thinner groupings and blowouts, coil vs rotary and pen machines.

All four checked 16 November 2026.

Want to learn fine line properly?

A relaxed, no-pressure call about where you are now and whether my four-day course is the right next step.

Chat it through with me See course dates
Book a free career call